ProcessorIntel® Xeon® processor 5500 and 5600 series
Six-core Intel® Xeon®
Quad-core Intel® Xeon®
Operating System
Microsoft® Windows® Small Business Server 2011
Microsoft® Windows® Small Business Server 2008
Microsoft® Windows Server® 2008 SP2, x86/x64 (x64 includes Hyper-V™)
Microsoft® Windows Server® 2008 R2 SP1, x64 (includes Hyper-V™ v2)2
Microsoft® Windows® HPC Server 2008
Novell® SUSE® Linux®Enterprise Server
Red Hat® Enterprise Linux®
Virtualization Options:
Citrix® XenServer™
VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
For more information on the specific versions and additions, visit www.dell.com/OSsupport.
Chipset
Intel™ 5520
Memory2
Up to 192GB (18 DIMM slots): 1GB/2GB/4GB/8GB/16GB DDR3
Up to 1333Mhz
Embedded Hypervisor (Optional)
Microsoft® Hyper-V™ via Microsoft® Windows Server® 2008
VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
Storage
Hot-plug Hard Drive Options:
2.5" SAS SSD, SATA SSD, SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)
3.5" SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)
Maximum Internal Storage:
Up to 24TB
External Storage:
For information about Dell external storage options, visit Dell.com/Storage.
Drive Bays
2.5" SAS SSD, SATA SSD, SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)
3.5" SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)
Maximum Internal Storage:
Up to 24TB
External Storage:
For information about Dell external storage options, visit Dell.com/Storage.
Drive Bays
Hot-Swap options available:
Up to eight 3.5" SAS or SATA drives
Up to sixteen 2.5" SAS, SATA or SSD drives
Slots
6 PCIe G2 slots + 1 storage slot:
One x16 slot
Four x8 slots
One x4 slot
One x8 Storage slot
RAID Controllers
Up to eight 3.5" SAS or SATA drives
Up to sixteen 2.5" SAS, SATA or SSD drives
Slots
6 PCIe G2 slots + 1 storage slot:
One x16 slot
Four x8 slots
One x4 slot
One x8 Storage slot
RAID Controllers
Internal:
PERC H200 (6Gb/s)
PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
SAS 6/iR
PERC 6/i with 256MB battery-backed cache
PERC S100 (software based)
PERC S300 (software based)
External:
PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
PERC 6/E with 256MB or 512MB of battery-backed cache
External HBAs (non-RAID):
6Gbps SAS HBA
SAS 5/E HBA
LSI2032 PCIe SCSI HBA
Network Controller
2 dual port embedded Broadcom® NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing.
Optional 1GBe and 10GBe add-in NICs
Communications
PERC H200 (6Gb/s)
PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
SAS 6/iR
PERC 6/i with 256MB battery-backed cache
PERC S100 (software based)
PERC S300 (software based)
External:
PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
PERC 6/E with 256MB or 512MB of battery-backed cache
External HBAs (non-RAID):
6Gbps SAS HBA
SAS 5/E HBA
LSI2032 PCIe SCSI HBA
Network Controller
2 dual port embedded Broadcom® NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing.
Optional 1GBe and 10GBe add-in NICs
Communications
Optional add-in NICs:
Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4
Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8
Intel 10GBase-T Copper Single Port NIC, PCI-E x84
Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8
Intel OPLIN 10G SFP+ copper dual port NIC PCI-E x8
Intel® Ethernet X520 DA2 Dual-Port 10 Gigabit Server Adapter
Broadcom® BMC57710 10Base-T Copper Single Port NIC, PCI-E x8
Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4
Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4
Broadcom® NetXtreme® II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload
Intel® Gigabit ET Dual Port Server Adapter
Intel® Gigabit ET Quad Port Server Adapter
Brocade CNA Dual-port adapter
Emulex® CNA iSCSI HBA stand up adapter OCE10102-IX-D
Emulex® CNA iSCSI HBA stand up adapter OCE10102-FX-D
Optional add in HBAs:
Qlogic® QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA
Qlogic® QLE 220 FC4 Single Port 4 Gbps Fiber Channel HBA
Qlogic® QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA
Qlogic® QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4
Qlogic® QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4
Emulex® LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4
Emulex® LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4
Emulex® LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
Emulex® LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
Brocade FC4 and 8 GB HBAs
Power
2 Hot-plug redundant PSUs. 750 Watts, 1100 Watts. Voltage range 100 - 240VAC, 50/60Hz
UPS (Uninterruptible Power supplies):
500W – 2700W
Extended Battery Module (EBM)
Network Management Card
Availability
ECC DDR3 memory, hot-plug hard drives; optional hot-plug redundant power supplies; dual embedded NICs with failover and load -balancing support (4 total ports) ; optional PERC6/i integrated daughter card controller with battery-backed cache; hot-plug redundant cooling; tool-less chassis; fibre and SAS cluster support; validated for Dell/EMC SAN
Video Card
Integrated Matrox G200
Chassis
T710 Tower or 5U rack-mountable Server
Height: 46.63cm (18.4")
Length: 73.18cm (28.9") (overall including bezel)
Width: 21.79cm (8.6")
Weight (maximum config): 35.3kg (78.0lb)
Rack Support
ReadyRails™ sliding rails for 4-post Racks:
Support tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks including all Dell 42xx & 24xx racks
NOTE: Threaded 4-post racks and 2-post racks require 3rd party conversion kits or fixed shelves available through Dell Software & Peripherals
Support full extension of the system out of the rack to allow serviceability of key internal components
Support optional cable management arm (CMA)
Rail depth without the CMA: 760 mm
Rail depth with the CMA: 840 mm
Square-hole rack adjustment range: 692-756 mm
Round-hole rack adjustment range: 678-749 mm
1U/2U Rail Attachment Brackets
Management
Dell™ OpenManage™
iDRAC6, Optional iDRAC6 Enterprise
Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4
Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8
Intel 10GBase-T Copper Single Port NIC, PCI-E x84
Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8
Intel OPLIN 10G SFP+ copper dual port NIC PCI-E x8
Intel® Ethernet X520 DA2 Dual-Port 10 Gigabit Server Adapter
Broadcom® BMC57710 10Base-T Copper Single Port NIC, PCI-E x8
Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4
Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4
Broadcom® NetXtreme® II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload
Intel® Gigabit ET Dual Port Server Adapter
Intel® Gigabit ET Quad Port Server Adapter
Brocade CNA Dual-port adapter
Emulex® CNA iSCSI HBA stand up adapter OCE10102-IX-D
Emulex® CNA iSCSI HBA stand up adapter OCE10102-FX-D
Optional add in HBAs:
Qlogic® QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA
Qlogic® QLE 220 FC4 Single Port 4 Gbps Fiber Channel HBA
Qlogic® QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA
Qlogic® QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4
Qlogic® QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4
Emulex® LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4
Emulex® LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4
Emulex® LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
Emulex® LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
Brocade FC4 and 8 GB HBAs
Power
2 Hot-plug redundant PSUs. 750 Watts, 1100 Watts. Voltage range 100 - 240VAC, 50/60Hz
UPS (Uninterruptible Power supplies):
500W – 2700W
Extended Battery Module (EBM)
Network Management Card
Availability
ECC DDR3 memory, hot-plug hard drives; optional hot-plug redundant power supplies; dual embedded NICs with failover and load -balancing support (4 total ports) ; optional PERC6/i integrated daughter card controller with battery-backed cache; hot-plug redundant cooling; tool-less chassis; fibre and SAS cluster support; validated for Dell/EMC SAN
Video Card
Integrated Matrox G200
Chassis
T710 Tower or 5U rack-mountable Server
Height: 46.63cm (18.4")
Length: 73.18cm (28.9") (overall including bezel)
Width: 21.79cm (8.6")
Weight (maximum config): 35.3kg (78.0lb)
Rack Support
ReadyRails™ sliding rails for 4-post Racks:
Support tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks including all Dell 42xx & 24xx racks
NOTE: Threaded 4-post racks and 2-post racks require 3rd party conversion kits or fixed shelves available through Dell Software & Peripherals
Support full extension of the system out of the rack to allow serviceability of key internal components
Support optional cable management arm (CMA)
Rail depth without the CMA: 760 mm
Rail depth with the CMA: 840 mm
Square-hole rack adjustment range: 692-756 mm
Round-hole rack adjustment range: 678-749 mm
1U/2U Rail Attachment Brackets
Management
Dell™ OpenManage™
iDRAC6, Optional iDRAC6 Enterprise
No comments:
Post a Comment